Mixing series

Home - Product - Mixing series

Ribbon mixer

Ribbon mixer

Horizontal ribbon mixer consists of U-Shape tank, spiral and drive parts. The spiral is dual structure. Outer spiral make the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing. Our TDL series ribbon mixer can mix many kinds of materials especially for the powder and granular which with viscosity or cohesion character, or add a little liquid and paste material into powder and granular material. The mixture effect is high. The cover of the tank can be made in open-type in order to cleaning and change parts easily.

More
Single shaft paddle mixer

Single shaft paddle mixer

The single shaft paddle mixer is applied to mix powders & powders, granules & granules, also can be adding a little liquid. It is widely application in mixing nuts, beans, feeds and other kinds of granule materials. There are different angle paddles which will throw the materials to mixing cross.

More
Double shafts paddle mixer

Double shafts paddle mixer

TDW non gravity mixer is called double-shaft paddle mixer too, it is widely applied in mixing powder and powder, granule and granule, granule and powder and a bit liquid. It is used for food, chemical, pesticide, feeding stuff and battery etc. It is high precision mixing equipment and adapts to mix different sizes of materials with different specific gravity, the proportion of formula and mixing uniformity. It can be a very good mix for which ratio reaches 1:1000~10000 or more. The machine can make the partial of granules broken after crushing equipment added.

More
Pull type double shafts paddle mixer

Pull type double shafts paddle mixer

TDWK no gravity open type mixer is also called pulling type paddle mixer. On the basis of long-term practice in the field of mixer, this series machine overcomes the drawback of horizontal mixer to clean up inconveniently. The gear reducer and mixer rotor are direct transmission, higher reliability and longer service life. It is used for mixing powder and powder, granule and granule, granule and powder, and adding a bit liquid. It is wide application in food, chemical, pesticide, feeding stuff and battery etc.

More
Lab bin blender

Lab bin blender

It is mainly used for the tests of mixing different components of dry powders with dry powders, granules with granules, or powders with granules in laboratories. It is shrinking actions and achieving better mixing effect. It is an ideal machine for exploring better process parameters in material mixing and an advanced mechanically and electrically integrated experimental machine.

More
Vertical mixer

Vertical mixer

1. The main mixing part is vertical ribbon; the side fast open large door makes the cylinder cleaning convenient and efficient. 2. The top of the mixer is arranged with the mixer drive assembly and feeding inlet, the drive form is generally the motor direct connection gear reducer.

More
Plough mixer

Plough mixer

The plough shear mixer is formed circular chamber,driving mechanism, plough s hears, discharging vent and other devices. Plough shears inside mixer are rotating with the main axial so that the materials along with the cylinder cantilever radial circumferential turbulence, at the same time the radial materials through shear group, was scattered by the high speed shear, constant alternation, compound, the materials are mixed uniformity in short time.

More
Column lifting hopper mixer

Column lifting hopper mixer

The column lifting hopper mixer is formed of column, machine base, rotation crotch, driving ,braking, controlling system ect. Pushing the hopper into the rotation crotch and lock the cap nuts. Start the controlling system to lift the hopper to the height of mixture and fix position. The driving system will be mixing as per setting time and rotation speed. The rotation crotch will be stopped vertically after finishing mixture. The hopper will be dropped down to the ground and stopped, print the data. Loosen the cap nuts and push off the hopper to next process.

More
Fixed bin blender

Fixed bin blender

1. Complete stainless steel structure, stable performance and easy operation. No dead corners, no exposed screws. 2. The rotary body (hybrid hopper) has a 30° Angle with the rotary axis. The material in the hybrid hopper turns with the rotary body, and at the same time moves entially along the bucket wall, producing strong turnover and high speed tangential motion, so as to achieve a good mixing effect. 3. Adopt plc fully automatic control, and set up the infrared safety device and the anti-error operation device of the discharge butterfly valve, to ensure the production safety. 4. Materials can pass through different processes in the same container, without frequent material transfer, feeding and other procedures. Effectively control the dust and cross pollution, reduce the loss of materials, control the stratification of materials, optimize the production process, fully meet the GMP requirements of medicine production.

More

　 1 2 　

Prev 1/2 Next

Product

Solution

About

Tandy machinery manufactures mixing

equipments, packaging equipments, conveying

equipments, checking weighers, industrial dust

collectors, batching systems. Many customers

use and recognize our products. It is with CE certification.

Tandy machinery manufactures mixing

equipments, packaging equipments, conveying

equipments, checking weighers, industrial dust

collectors, batching systems. Many customers

use and recognize our products. It is with CE certification.

Contact Us

Contact Us

Shanghai Tandy Machinery Manufacturing Co., Ltd.

Legal declaration Site map

Links

                            
Home

Tel

Top